Thoughts from Pastor Chuck Huckaby

Adjustable Clamp 13025 Pony Light-Duty Clamp-on Vise

Adjustable Clamp 13025 2-1/2″ Light-Duty Clamp-On ViseThe Adjustable Clamp Company was incorporated in 1903, by Adele V Holman, to manufacture genuine Jorgensen Handscrews. Today 5 generations later great-great-grandson Douglas Holman is President of the company. Throughout the years each Holman has put his or her mark on the company.Adjustable Clamp 13025 2-1/2″ Light-Duty Clamp-On Vise Features:; Clamp-on vise; Jaw faces have smooth, machined surfaces; Clamp-on base provides portability; Mounts securely on edges up to 2-1/2″ thick; Double guide bars create smooth operation and accurate adjustmentsEvery workshop needs at least one vise, and Pony’s incredible clamp-on vise is perfect. It’s completely portable and clamps onto any table up to 2 inches thick. The sliding handle turns like a charm, and you’re set. For such an incredibly inexpensive vise, the jaws are really wide, and they even have a serrated surface, with an open capacity of a full 2-1/2 inches. We can think of a thousand uses for such a handy device. It’s like an extra hand whenever and wherever you need it. Pony’s earned its reputation as a maker of fine clamps, so you know anything in the distinctive bright orange color will do right by you. This is no exception.–Kris Jensen-Van Heste

• 3-inch serrated jaws for steadfast clamping
• Table clamp mounts solidly on worktables up to 2-inches thick
• Double guide bars for positive clamping
• Made with plated steel for longer tool life
• 2-1/2-inch jaw opening capacity for holding a variety of materials

List Price: $ 20.35
Price: $ 15.92

Adjustable Clamp 23530 Pony Light-Duty Bench Vise with Swivel Base

Adjustable Clamp 23530 3-1/2″ Light-Duty Pony Bench Vise With Swivel BaseThe Adjustable Clamp Company was incorporated in 1903, by Adele V Holman, to manufacture genuine Jorgensen Handscrews. Today 5 generations later great-great-grandson Douglas Holman is President of the company. Throughout the years each Holman has put his or her mark on the company.Adjustable Clamp 23530 3-1/2″ Light-Duty Pony Bench Vise With Swivel Base Features:; Intended for light-duty home, shop, and professional use; Exhibits rugged strength usually found in more expensive vises Lock-nuts allow the vise to swivel a minimum of 270º on its base; Grey iron castings with orange baked-enamel finish; Square four-hole swivel bases; Sturdy steel serrated jaw faces

• 3-1/2-inch jaw width with 3-inch maximum opening capacity
• Swivels a minimum of 270 degrees on square four-hole base
• Sturdy steel jaw faces, forming horn and permanent pipe jaws
• Casting has orange baked-enamel finish, all hardware plated-steel

List Price: $ 32.00
Price: $ 22.97

Vise-Grip 18-6SP Locking C Clamp with Swivel Pads

Wide-opening jaws provide greater versatility in clamping a variety of shapes. – Swivel pads hold tapered work awkward fabricating jobs and delicate projects without damaging the work surface. – Constructed of high-grade heat-treated alloy steel for maximum toughness and durability. – Guarded release trigger quickly unlocks and protects from accidental release. – Jaw adjustment: 0-Inch – 2-1/8-Inch / 0 mm – 54 mm

• Wide-opening jaws provide greater versatility in clamping a variety of shapes
• Swivel pads hold tapered work, awkward fabricating jobs, and delicate projects without damaging the work surface
• Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use
• Constructed of high-grade heat-treated alloy steel for maximum toughness and durability
• Guarded release trigger quickly unlocks and protects from accidental release

List Price: $ 16.05
Price: $ 8.84

The 2009-2014 World Outlook for Clamps and Vises Excluding Machine Tool Accessories

This econometric study covers the world outlook for clamps and vises excluding machine tool accessories across more than 200 countries. For each year reported, estimates are given for the latent demand, or potential industry earnings (P.I.E.), for the country in question (in millions of U.S. dollars), the percent share the country is of the region and of the globe. These comparative benchmarks allow the reader to quickly gauge a country vis-à-vis others. Using econometric models which project fundamental economic dynamics within each country and across countries, latent demand estimates are created. This report does not discuss the specific players in the market serving the latent demand, nor specific details at the product level. The study also does not consider short-term cyclicalities that might affect realized sales. The study, therefore, is strategic in nature, taking an aggregate and long-run view, irrespective of the players or products involved. This study does not report actual sales data (which are simply unavailable, in a comparable or consistent manner in virtually all of the 230 countries of the world). This study gives, however, my estimates for the worldwide latent demand, or the P.I.E., for clamps and vises excluding machine tool accessories. It also shows how the P.I.E. is divided across the world’s regional and national markets. For each country, I also show my estimates of how the P.I.E. grows over time (positive or negative growth). In order to make these estimates, a multi-stage methodology was employed that is often taught in courses on international strategic planning at graduate schools of business.

List Price: $ 795.00
Price: $ 795.00

MTM Gun Vise

The MTM Gun Vise features a fast, single adjustment clamp down and a secure non-marring hold. The gun forks are positioned high and low giving the option of a level clamp up for maintenance, or a sloped clamp up for drainage. Shotgun barrels are held securely for easy cleaning. Organize your cleaning supplies with the 14 separate compartments, including a small divided tray that slides to uncover more compartments in the base for smaller, easy to lose items. Eleven screw driver bit holders, molded to the unit, are as easily suited for jags and brushes as they are bits. If you pay close attention to the details, there is a place provided (low and out of the way) for holding two cleaning rods. No more trying to figure out where to rest your rod while making adjustments. Made of rugged, chemical and solvent resistant polypropylene plastic, the MTM Gun Vise is made to last!

• The MTM Gun Vise is made to last from chemical and solvent resistant polypropylene plastic
• Fast, single adjustment clamp-down and a secure, non-marring hold
• Room to organize cleaning supplies with various sized compartments for patches, screw driver bits, jags, brushes, solvents and cleaning rods
• Features four skid-resistant rubber feet and free-standing or bolt down

List Price: $ 44.99
Price: $ 41.09

Clamp-It Hobby Vise

An adjustable table clamp will hold a variety of tools and objects for you.

• Clamp-It is an adjustable clamping device that can be used to hold an item in a fixed position. It is a wonderful help when doing crafts – use it for holding a knitting needle or crochet hook.
• This is also a great tool for single handed people. Put your glasses in it when they need cleaning or adjusting, hold your nail file, magnifier, almost anything you need!
• Clamp-It is mounted on four suction cups for extra stability.
• The clamp bar can be used vertically or horizontally.
• Adjust the clamp size simply by turning the two wing nuts. Maximum holding width is 1 inch.

Price: $ 30.00

Xacto X75170 X-tra Hands with Magnifier

The X-TRA Hands dual alligator clamps with 2X magnifying glass by X-ACTO is the perfect solution for any hobbyist or designer who needs a second set of hands to hold onto materials. These clamps will hold your work firmly in position, freeing your hands up for soldering, gluing and other tasks.

The powerful, 2X magnifying glass will help you visualize even the smallest areas of your work. These convenient alligator clamps are great for the following tasks:

Gluing in small or tight spaces 
Precision “micro” cutting and trimming 
Small detail touches
And more

These sturdy alligator clamps attach securely to almost any rigid surface, allowing you to continue working at your desk or workshop without needing to relocate.

X-ACTO office tools and supplies are crafted with the same quality and attention to detail as the legendary X-ACTO knife. Our commitment to quality and performance assures that an X-ACTO product will stand up to the toughest jobs for as long as you need them.

X-ACTO quality office tools and supplies are crafted to achieve the perfect balance between performance and durability. Versatile enough to tackle the most heavy duty jobs and precision tasks at the same time, X-ACTO office tools make getting the job done easier. Additionally, all our products are designed with added attention to your comfort and safety.

• Dual alligator clamp for flexible and accurate work
• Holds work in any position for modeling and hobbies
• Assortment of knives, blades and tools for cutting, whittling, sawing and carving. Wooden chest.
• Two times magnifier for close, exacting work

List Price: $ 12.68
Price: $ 11.95

Delkin DDMOUNT-VISE Fat Gecko Clamp/Vise Camera Mount

The Fat Gecko Gator Mount is a revolutionary new camera mounting device used to hold a camera in place while clamped to almost any surface. With a universal ¼” tripod thread, a vise-like grip and a three inch “mouth”, the Gator Mount can securely attach to a wide range of surfaces while holding digital still cameras, video cameras and more. From wedding and commercial photographers, world travelers, action enthusiasts and more, the Fat Gecko Gator Camera Mount expands hands free shooting possibilities for still and video creation in almost any situation. The wide three inch ‘mouth’, vise-like grip, rugged construction, and 360° rotating knuckle makes the Gator Mount a go-anywhere.

• Intended Use: Digital SLR cameras, video cameras, compact cameras and tripod heads weighing up to 3 lbs.
• Works with any camera using 1/4″ tripod thread
• Unlimited shooting angles with adjustable 360 tilt, turn & rotation
• Attaches to unlimited surfaces with powerful locking vise
• Holds up in extreme conditions with ruggedized construction

List Price: $ 39.99
Price: Too low to display